This T-8000A-TTL port controller, load 512 lights each port, the playback speed can be up to 30 frames/sec; if it connect more than 512 lights each port, the frame rate would automatically reduce according to the number of lights. Support APA102, APA104, APA105, APA107, SK6812, SK6813, SK6815, LPD6803,D705,1101,UCS6909,UCS6912, LPD8806,LPD8809, TM1803,TM1804,TM1809,TM1812,UCS1903, Standard DMX,HX512, WS2801,WS2803, TLS3001,TLS3002,TLS3005,TLS3008, P9813, SM16715, SM16716, BS0815,BS0825,BS0901 IC etc.

Description:

Product Description

Specification for Controller

• 1. 32—256 Grey Control, Gamma correction procession software.
  2. Combined with video encoding and broadcasting software LedEdit , support rules and specific-shaped handle, and other points, line lights source
  3. Eight-port output,port 512/1024 lights.
  4. Playback content stored in SD card, can stand-alone play, also multiple cascade.
  NOTE:T-8000A port 512 lights, the playback speed of up to 30 frames / sec, the port more than 512 lights, the frame rate with the increase in the number of lights automatically reduced.
  When multiple cascade, only the first controller buttons work, followed by sub-control buttons are automatically shielded, at this point can adjust playback file and speed through the first controller
  NOTE:At this time the first controller's buttons can control all sub-control keys
  Support chips:
  NOTE : When multiple cascade, only the first controller buttons work, followed by sub-control buttons are automatically shielded, at this point can adjust playback file and speed through the first controller
  At this time the first controller's buttons can control all sub-control keys.

Support chips

Name of the program(The rule of how to name the programs)

The name for NO.2 controller

• “00_1.led” --------- NO.1 program for No.1 controller
• “01_1.led” --------- NO.2 program for No.1 controller
• “02_1.led” --------- NO.3 program for No.1 controller
• ……
• “15_1.led” --------- NO.16 program for No.1 controller

The name for NO.2 controller

• “00_2.led” --------- NO.1 program for No.2 controller
• “01_2.led” --------- NO.2 program for No.2 controller
• “02_2.led” --------- NO.3 program for No.2 controller
• ……
• “15_2.led” --------- NO.4 program for No.2 controller

screenshots(Name of the program)

Special parameters

Memory card

• type:SD card(suggest using high-speed SD card if control more lights)
• Capacity:128MB—2GB
• Format:FAT
• Store file:*.led
• Note:Please format sd card to FAT before you use

Power Adapter

• Input: AC 100V -240V, 50/60Hz
• Output:DC 5V 2A

Packing List